1000V Class 0 Insulated rubber gloves by Ansell ACTIVARMR are a critical life-saving piece of PPE for all electrical workers. Our gloves are made from 100% natural rubber, and are designed to protect workers interacting with exposed energized, de-energized or re-energized electrical circuits.
1000V Class 0 insulated rubber gloves are suitable for electricians, overhead line workers, cable jointers, Accredited Service Providers (Level 1 ASP & Level 2 ASP), Recognised Electrical Contractors (REC) and any other worker who may come in contact with electrical circuits.
Specifications for 1000V Class 0 Insulated Rubber Gloves
- 1000V AC, 1500V DC Maximum Voltage Use
- Class 0
- Length 360mm (14 inch)
- Rolled Cuff
- Natural latex rubber
- Yellow in Colour
- Compliant with standards
- ASTM D120-09
- OSHA 1910.137
- OSHA 1910.268
- NFPA 70E
- IEC EN60903
- No expiry period on the gloves
- Ansell ActivArmr (formerly Marigold)
How to Measure:
Wrap a tape measure all the way around your palm at the point shown in the diagram below. This will show the size of glove to select. Personal preference for tightness and finger length will ultimately determine the size that you are most comfortable wearing. Allow an extra half inch if cotton inners are to be used.
Testing & Pre-use Checks:
You should carry out a visual and inflation test on your gloves before every single use. First, look for signs of visual damage (punctures or cuts), chemical deterioration (swelling, softness, hardening, stickiness) and other irregularities. Our glove air check tool is ideal for doing an inflation test on your gloves. Simply slide the glove in one end, roll the cuff up to trap the air inside and listen for escaping air, which will indicate a hole or puncture in the glove. In the event of any leakage or deterioration, stop using and dispose of the gloves immediately.
Storage and Transport
Store your gloves away from all sources of moisture or light. Do not store near steam pipes, radiators or other sources of artificial heat or ozone. We recommend storing gloves in a protective canvas bag, which will prevent your gloves from being compressed or folded. We have both single and double-pocket bags available.
For more info about this product, please contact us.